Kurzweil PC3K Series - Song Mode: The METRO Page

Song Mode and the Song Editor
Song Mode: The METRO Page
12-13
Song Mode: The METRO Page
AlloftheparametersaffectingthesequencermetronomeareontheMETROpage.Likethe
otherpagesintheSongEditor,youcansavechangesmadeinthispage.
Metronome
Thisparameterdeterminestherecordingmodesinwhichthemetronomeplays.With
MetronomesettoOff,themetronomeneverplays.WithMetronomesettoRec,themetronome
onlyplaysduringrecording.WithMetronomesettoAlways,themetronomeplaysduring
playbackandrecording.
CountOff
ThisparameterdeterminesthenumberofmeasuresthePC3Kwillcountoffbeforerecording.
WithStartOnlyselected,thePC3Kwillonlycountoffatthebeginningofasequence.With
Alwaysselected,thePC3Kwillcountofffromanypointinasequence.
Program
Thisparameterdeterminestheprogramwithwhichthemetronomeisplayed.Ifyouwanteda
pianoforametronome,forinstance,youcouldsetProgramtoapianoprogram.Thedefault
programis998ClickTrack.
Channel
ThisparameterdeterminestheMIDIchanneltowhichthemetronomeprogramandeventsare
sent.
Parameter Range of Values Default
Metronome Off, Rec, Always Rec
Count Off Off, 1, 2, 3, 4 (StartOnly,
Always)
1 (StartOnly)
Program Program List 998 Click Track
Channel 1 to 16 16
Strong Note 0 to 127 102
Strong Velocity 0 to 127 127
Soft Note 0 to 127 104
Soft Velocity 0 to 127 100