Kurzweil PC3K Series User Manual

Program Mode
The KEYMAP Page
6-19
The KEYMAP Page
PresstheKEYMAPsoftbuttontocalluptheKEYMAPpage.Theparametersonthispageaffect
samplerootselection,i.e.,whichsamplesareplayedonwhichkeys.
Keymap
AssignakeymapfromROMtothecurrentlayer.Keymapsarecollectionsofsamplesassigned
tonoteandvelocityranges.WiththeKeymapparameterselected,presstheEditbuttontoenter
theKeymapeditor(seeTheKeymapEditor on page 14‐1fordetails.)
Transpose (Xpose)
Transposethecurrentkeymapupasmuchas127semitones(tenoctavesandaperfectfifth)or
downasmuchas128semitones(tenoctavesandaminorsi xth).
Key Tracking (KeyTrk)
ThisisoneofthesixcommonDSPcontrolparameters.OntheKEYMAPpage,keytracking
affectstheintervalbetweennotes.Thedefaultvalueof100cents(acentisahundredthofa
semitone)givesyouthenormalsemitoneintervalbetweeneachnote.Highervaluesincreasethe
interval;lowervalues
decreaseit.Negativevalueswillcausethepitchtodecreaseasyouplay
highernotes.
Whenyoumakechangestothisparameter,you’llneedtokeepinmindthatKeyTrkonthe
KEYMAPpageworksinconjunctionwithKeyTrkonthePITCHpage.Therefore,you’llneedto
checktheKeyTrkvalue
onbothpagestoseehowkeytrackingworkswithinaprogram.Unless
you’relookingfornonstandardnoteintervals,thevaluesoftheKeyTrkparametersonthe
PITCHandKEYMAPpagesshouldaddupto100cents.
Parameter Range of Values Default
Keymap Keymap List 1 Piano f Left
Transpose -128 to 127 semitones 0
Key Tracking ± 2400 cents per key 100
Velocity Tracking ± 7200 cents 0
Alt Method Switched, Continuous Switched
Stereo Off, On Off
Timbre Shift ± 60 semitones 0
Playback Mode Norm, Rvrs, Bidirectional, Noise Normal
Alt Control Control Source List Off

Kurzweil PC3K Series Specifications

General

Brand	Kurzweil
Model	PC3K Series
Category	Synthesizer
Language	English