Kurzweil PC3K Series - Song Mode: The FX Pages

Song Mode and the Song Editor
Song Mode: The FX Pages
12-11
Song End
TheSongEndparameterdeterminestheendpointforthesong.NotethatwhenTimeOutand
SongEndaresettothesamelocation,changesmadetoSongEndarereflectedinTimeOut.
WhenrecordingbeyondyourinitiallyspecifiedSongEndpoint,you’llnoticethattheSongEnd
location
automaticallymovesandroundstothenextbar,soastoalwaysbeaheadofthe
playhead.ItispossibletomovetheSongEndpointtoalocationbeforeotherMIDIevents(i.e.,
inthemiddleofthecurrentsong)—thesequencerwillignore(butnotdelete)eventsafterthis
point.
Loop
WiththeLoopparametersettoLoop,thesequencerwillloopthesegmentofthesongbetween
TimeInandTimeOut.
Punch
WiththePunchparametersettoPunch,thesequencer(inRECORDINGmode)willrecord
eventsonlybetweenTimeInandTimeOut.
Metro
TheMetroparameterdeterminestherecordingmodesinwhichthemetronomewillplay.With
MetrosettoRec,themetronomeonlyplayswhilerecordingisinprogress. WithMetrosetto
Always,themetronomeplaysduringplaybackandrecording.WithMetrosettoOff,the
metronomedoesnʹtplay
atall.
Song Mode: The FX Pages
ThefourSongmodeFXpages—FX,AUXFX1,AUXFX2,andMASTFX—workthesamewayas
theEffectsmodepages—CHANFX,AUXFX1,AUXFX2,andMASTER.SeetheEffectsmode
chapterforinformationoneditingthesepages.