Kurzweil PC3K Series - The Continuous Control Pedal (CPEDAL) Page

Setup Mode
The Continuous Control Pedal (CPEDAL) Page
7-35
The Continuous Control Pedal (CPEDAL) Page
Ifyoulookatthebackoftheinstrument,youwillseethattherearetwojacksforpluggingin
twoCC(ContinuousControl)pedalsandajacklabeledBreathController.Likethenine
programmablesliders,youcanassignthesecontrollersoneachofthe16zones,oryoucan
assign
anycombinationofthesecontrollerstothesamezone.
TheCPEDALpageparametersaredescribedinContinuousControllerParameters on page 7‐30 .
Parameter Range of Values Default
Destination (CPed1) Control Destination List Express
Destination (CPed2) Control Destination List Foot
Destination (Breath) Control Destination List Breath
Scale ± 300% 100%
Add -128 to +127 0
Curve Linear, Compress, Expand Linear
Entry Value None, 0 to 127 None
Exit Value None, 0 to 127 None