Kurzweil PC3K Series - Chapter 10 MIDI Mode; The TRANSMIT Page

MIDI Mode
The TRANSMIT Page
10-1
Chapter 10
MIDI Mode
ThePC3KsendsandreceivesMIDIontraditional5‐pinDINconnectorsandthroughUSB.MIDI
canbesentandreceivedonallportsatonce.
PresstheMIDImodebuttontoenterMIDImode.TherearethreepagesinMIDImode:
• TRANSMIT(XMITsoftbutton)
• RECEIVE(RECVsoftbutton)
• CHANNELS(
CHANLSsoftbutton)
You’llusethesepagestodeterminewhatMIDImessagesthePC3Ktransmits,andhowit
respondstotheMIDImessagesitreceives—aswellashoweachMIDIchannelbehaves.
WhenyouenterMIDImode,you’llseeoneofthethreeavailableMIDImodepages.
The TRANSMIT Page
PresstheXMITsoftbutton,andtheTRANSMITpageappears.Usetheparametersonthispage
tocontrolhowthePC3KsendsMIDIinformationtoitsUSBorMIDIOutport.Thesesettingsto
someextentaffectthePC3K’sresponsetoitsownkeyboardandcontrollers,buttheyprimarily
affectthe
responsesofotherMIDIdevicesthatarereceivingMIDIfromthePC3Konthechannel
specifiedwiththeChannelparameteronthispage.
Whenaprogramisselected,eitherinProgrammodeorinQuickAccessmode,allofthesettings
oftheTRANSMITpageareineffect,exceptforChgSetups
,whichonlyapplieswhenloadinga
setup.
Ifasetupisselected,inSetupmodeorinQuickAccessmode,allofthesettingsofthe
TRANSMITpageareineffectexceptforControlSetup,Channel,andProgChang(seebelowfor
details.)
WhensendingMIDItotheUSBor
MIDIoutportfromSongmode,Songmodeignoresallofthe
settingsontheTransmitpageexceptControlSetup(s eebelow fordetails.)