Kurzweil PC3K Series - Delete; New Zone (Newzn); Duplicate Zone (Dupzn); Import Zone (Impzn)

7-68
Setup Mode
The Utility Soft Buttons
Delete
Thiserasesasetupfrommemory,freeingupspacetostoresetupsinotherlocations.(Youcan
checkthefreememoryinthePC3Katanytime,onthetoplineoftheMaster‐modepage.)Press
Delete,anduseadataentrymethodtochoosewhichsetupyouwant
deleted.PressDelete
again,andan“A r eYouSure?”message willappear(unless youhavesetavalueofNoforthe
ConfirmparameterontheMastermodepage).PressYestodeletethesetup,orNotocancel.
Aswithprograms,setupscanbesavedtoanddeletedfrommemory
only.Thenamesofall
setupsinRAMhaveanasterisk(*)nexttothem.IfyoutrydeleteasetupfromROM,thePC3K
willignorethedeletecommand,andthesetupwillremaininmemory.
New Zone (NewZn)
PressNewZntocreateanewzonewithdefaultparameters.ThePC3Kimportsthiszonefrom
Zone1of128DefaultSetup.Ifthereareparametersorentirepagesyouuseoften,youcan
createyourownDefaultSetu pandsaveittolocation128;pressingNewZnwillthenimport
zonesfromyourcustomDefaultSetup.
Duplicate Zone (DupZn)
Thisaddsanewzonewiththesameparametersasthecurrentzone.
Import Zone (ImpZn)
Youcanimport,or“bringin,”anyzonefromanysetupinmemory.PressImpZn,anduseany
dataentrymethodtochooseasetuptoimportfrom.ThenusetheChan/Layerbuttonstoselect
oneofthatsetup’szones. NowpressImport,andthezoneyouselectedwillbe
addedtothe
currentsetup.
Note:Ifyouareusingall16zonesinasetupandyoutry toadd,duplicate,orimportazone,a
“NoMoreZones”messageappears.Youmustdeleteanexistingzonebeforeyoucanadd,
duplicate,orimportanynewones.
Delete Zone (DelZn)
Thisdeletesthecurrentzonefromthesetup.UseDelZntofreeupzonessoyoucanaddor
importnewones.