Kurzweil PC3K Series - Program and Category Buttons; Picking Favorites

3-4
User Interface Basics
Program and Category Buttons
Program and Category Buttons
UsetheProgramandCategorybuttons,inconjunctionwiththeBankbuttons,todirectlyselect
PC3Kprograms.Eachofthe16categoriescontains8programs.
Picking favorites
Whenyouselectaprogramwithinacategory,yourselectionwillberemembered.Forexample,
chooseprogram3intheOrgancategory(pressCategory:Organ,thenProgram:3).Nowmove
tothestringsbypressingtheCategory:Stringsbutton.IfyoupresstheCategory:Organbutton
again,youwillbe
returnedtoprogram3intheOrgancategory.Inthis way,eachcategorycan
havea“favorite”program.
Youcanmakeprogramselectionswithineachcategoryahead oftime.Thisway,you’llbeableto
accesstheprogramyouwantinanycategorysimplybypressingappropriatecategorybutton.
Importantthings
torememberaboutyour“favorites”:
•YoumustsaveyourPC3K’sMasterTabletorememberyourselectionsacrosspowercycles.
SeeChapter 11forinformationabouttheMasterTable.
•Yourselectionsarebank‐dependent.Inotherwords,youcansaveeightintheBase1bank,
eightintheExp1bank,etc.