Kurzweil PC3K Series - The Channels Page

MIDI Mode
The Channels Page
10-13
The Channels Page
PresstheCHANLSsoftbuttontoselecttheCHANNELSpage,whereyoucandefinenumerous
parametersforeachMIDIchannelindependently.UsetheChan/Layerbuttonstoselectthe
MIDIchannelyouwishtoworkon.
TheCHANNELSpageisveryusefulwhenyou’ redoingmulti‐timbralsequencing,with
programsassignedto
numerousMIDIchannels.TheCHANNELSpageletsyousetseveral
controlcharacteristicsforeachMIDIchannel.Thismakesiteasytoadjusttheplaybackofthe
sequencewithouteditingthesequenceitself.Forexample,youmightturnofftheEnable
parameterforoneormorechannelstomutethetrackson
thosechannels.Youcouldalsosetthe
VolLockparametertoOn,toignoreanyMIDIvolumemessagesthePC3Kreceivesonagiven
MIDIchannel.
Enable
Usethisparametertoturnthecurrentlyselectedchannelonoroff.Whenon,thechannelwill
receiveMIDIinformation,andthesettingsoftheparametersontheMIDICHANNELSpage
willbeineffect.Whenoff,thechannelwillignoreallMIDIinformation.
Program
Usethisparametertoassignaprogramtothecurrentlyselectedchannel.Thechannelwillstill
respondtoprogramchangecommandsreceivedviaMIDI,unlessthePrgLockparameter
(describedbelow)issettoOn.
Parameter Range of Values Default
Enable Off, On On
Program Program list Program ID 1
Pan 0 to 127 64 (centered)
Volume 0 to 127 127 (maximum)
Program Lock Off, On Off
Pan Lock Off, On Off
Volume Lock Off, On Off