Kurzweil PC3K Series - The COMMON Page

7-56
Setup Mode
The COMMON Page
The COMMON Page
TheCOMMONpagecontainsparametersthataffecteveryzoneinthecurrentsetup.
Tempo
WhenClockSourceissettoInternal,theTempoparametersetsthePC3Ksystem’stempo.The
TempoparametervaluesareinunitsofBPM(beatsperminute).Youcanalsosetthetempo
usingthetaptempofunction.Presstheleftandrightcursorbuttonssimultaneouslytoaccess
theTEMPO
page(seeTEMPO on page 11‐10.)
Clock Source
WiththeClockSourceparameter,youcansetthePC3K—withinthecurrentsetup—togenerate
itsowntempobysettingClockSourcetoInternal,oryoucansetthePC3Ktosy nc upwiththe
tempofromanotherdevice—assumingthedeviceissendingMIDIclockdatatothePC3Kvia
MIDI
orUSB—bysettingClockSourcetoExternal.WhenClockSourceissettoExternal,the
Tempoparameterdisappearsfromthedisplay.
Aux FX Channel
TheAuxFXChanneldeterminestheFXchannelthroughwhichtheauxsendsofallofthezones
inthecurrentsetuparesent.Forexample,ifazone2inasetuphasaprogramwith25Basic
Delay1/8asanAuxFX,andzone2isassignedto
channel5,thensettingtheAuxFXChannelto
5sendstheprogramsofallofthezonesinthesetupthroughzone2’sProgram’sAuxFX(i.e.,
through25BasicDelay1/8).
Parameter Range of Values Default
Tempo 20 to 300 120
Clock Source Internal, External Internal
Aux FX Channel 1 to 16 1
KB3 Channel 1 to 16 1
Mutes Zone Mutes, KB3 Control Zone Mutes
Arpeggiator Global Off, Arp 1 to 16 Off
Arpeggiator Sync Not in Sync, Sync Mode Not in Sync