Section II Steering System
The steering system is a special mechanism to change or maintain the driving direction of a
vehicle. It is used to change the direction at a proper time according to the requirement of the
driver during driving, and cooperate with the driving system to keep the vehicle moving stably in
case that the vehicle moves off the driving direction due to the accidental impact from the road
surface. It is one of the important systems to keep safe driving. Therefore, check and maintenance
of the steering system in time is an effective measure to ensure safe driving and fewer accidents.
The steering wheel of LF620 sedan is composed of steering wheel 1, steering column 2, power
steering pump 5, oil tank 4, steering gear 3, etc. Follow Fig. 2-23.
Fig. 2-23
1. Return line bracket 2. Hex bolt with flat washer
3. Return line clamp 4. Return line bracket B
5. Steering oil pump intake pipe 6. A-type worm-driven tube hoop
7. A-type worm-driven tube hoop 8. Power steering oil can assembly
9. Hex bolt with flat washer (75N·m) 10. Power steering oil can clip
11. Power steering oil can bracket 12. Power steering oil pump assembly
13. Steering return line assembly 14. Steering gear intake pipe assembly
15. Hexagon flange bolt (75N·m) 16. Oil pipeline bracket A component
17. Cotter pin 18. Hex slotted thin nut (75N·m)
19. Steering gear and tie-rod assembly 20. Hexagon flange bolt (75N·m)
21. Acoustic hood on the steering gear 22. Collar of acoustic hood on the steering gear
23. Steering column dustproof cap components 24. Steering column and adjustment mechanism assembly
25. Steering wheel assembly
To Next Page
Loading...
