Section V Rear Side Door
I. Decomposition Diagram. See Fig. 7-6:
Fig .7-6
1. Right rear side window assembly 2. Right rear side door angle window assembly
3. Right rear side door angle window glass seal 4. Right rear side door window glass sealing strip
5. Right rear side window glass supporting bracket treadle bar
6. Right rear side window glass supporting bracket assembly
7. Right rear window glass frame riser assembly 8. Right rear side door sealing strip
9. Right rear side door top hinge assembly 10. Right rear side door bottom hinge assembly
11. Right rear side door limiter assembly 12. Right rear side door frame sealing strip
13. Right rear side door outside handle assembly 14. Right side door inner handle assembly
15. Right rear side door lock 16. Side door locking ring
II. Rear side door glass
1. Removal:
(1) Remove the rear side door glass frame riser switch assembly.
(2) Remove the rear side door ornamental guard panel.
(3) Remove the rear side door sealing film.
(4) Remove the rear door movable guide rail and the triangle window glass to avoid the damage.
(5) Dismantle the rear door glass.
2. Installation: install the glass of the door as per the opposite process, and pay attention to the
following notes:
(1) Check whether the top of the glass and the sliding channel contact evenly or not, and the
up-and-down movement is stable or not during the installation.
(2) Adhere the door sealing film firmly with the adhesive.
III. Glass frame riser:
1. Removal:
1) Remove the rear side door glass referring to the rear side door glass removal process.
To Next Page
Loading...
