3. Vehicle body structure model and parameter (Table 6)
Table 6 Vehicle Body and Inner and Outer Trim
Name Structure and parameter
Vehicle model
Integral body, 3 compartments, 4 doors, 2 covers and 5
seats
Body-in-white All metal closed type structure
Door assembly
Framed, 4 doors open in regular direction, card lock, with
side bumper
Engine hood Open backward, bent arm hinge
Vehicle
body
Front and rear bumpers Injection molding
Inner trim Injection molding with surface texture
Dash board Injection molding with surface texture
A, B and C pillars and indoor shield Injection molding framework, knitted surface
Windshield
Front windshield: laminated glass,
rear window: Toughened glass
Outer rearview mirror: Convex mirror in both left and right,
manual/automatic adjustment
Rearview mirror
Inner rearview mirror: Anti dazzle
Inner and
outer
trims
Seat
Front seat: independent seat, adjustable back and forth
position, backrest angle, headrest and so on; rear seat
with safe belt: dependent seat, unadjusted
Structure model Compressive refrigeration, water heating
Operation
Adjusted with knob to control air flow direction, to control
and adjust air flow speed, temperature and air circulation;
luxurious ones with electric adjustment
A/C
Refrigerant Model R134a, filling 500g ± 50g
To Next Page
Loading...
