IV. Engine and vehicle body bottom
1. Vehicle body bottom: Check if the fuel pipe, brake oil pipe and bottom protection layer are
damaged; check if the exhaust pipe leaks and if fastening is reliable.
2. Steering tie rod: Check the clearance; check if the connection is reliable and if dustproof cover
is damaged.
3. Brake lining: Check the thickness.
4. Parking brake: Check and adjust the length of cable if necessary.
5. Tire (including spare tire): Check the worn condition of tire; check the tire pressure.
6. Wheel alignment: Check with wheel aligner.
7. Wheel fixing bolt: Check according to specified torque.
8. Headlamp: Check and a.
9. Trial run: Check the performance.
Abbreviations in this manual
A
AC Alternating current
ACC Air conditioning clutch
ACMC Air conditioning magnetic clutch
ACT Air charge temperature
A/C Air conditioning
ABDC After bottom dead center
ABS Anti-lock brake system
A/D Aanalog/digit
A/F
Air/fuel ratio
AFS
Air flow meter (air flow sensor)
A-ELR
Automatic/emergency locking retractor (of safety belt)
ATDC After top dead center
API American Petrol Institude
ATF Automatic transmission fluid
ALR Automatic locking retractor (of safety belt)
ASD Automatic switching-over device
A/T Automatic transmission
B
BATT Battery
B＋
Battery positive pole
BBDC Before bottom dead center
To Next Page
Loading...
