Then insert lower part of sundries box as shown in Fig. 7-38.
Fig. 7-38
2. Connect fascia console upper guard panel with vehicle body
As shown in Fig. 7-39, seen from back side, there are 5 buckles attaching to vehicle body in front
part of instrument panel.
Fig. 7-39
The 5 buckles on upper guard panel of fascia console must be inserted into the lower part of beam
under windshield
There are 5 buckles and 4 screws on upper and down guard panels of fascia console as
connecting equipments. The 4 screws and A type spring nut are fastened to the lower part of the
left and right A/C vent and the middle of CD and A/C panel. The 4 screws are shown in Fig. 7-40
and Fig. 7-41.
Fig. 7-40 Fig. 7-41
Seen from back side, 5 buckles and 4 screws are needed to connect the upper and lower guard
panels.
To Next Page
Loading...
