5. Front passenger safety belt pre-tensioner. Check the front passenger safety belt pre-tensioner
for depression, crack and distortion, the harness and interface for damage and the terminal for
distortion. Check the pre-tensioner for normal installation. Renew if necessary.
6. Clock spring. Check the interface and harness of the clock spring for damage and the circuit
performance of the clock spring as per 2.3.14. Renew as required.
7. Harness. Check the air bag harness for firmness, the harness and interface for damage and the
terminal for distortion. Renew if necessary.
Note: Replace the entire air bag components if they are soaked by water.
8. Press the SST switch and deploy the air bag. With the LED lamp of the SST switch on, the air
bag deploys simultaneously.
To Next Page
Loading...
