Page 112 of 182 TP1A002–1 English
Aug 2015
Linx 8900 Operating Manual —
Add other fields
Linx 8900
6.5.5 Remote field warnings
If there is a problem when you select a message that contains one or more Remote fields for
printing, the printer may display the following warnings.
“3.68 Field Truncation”
The size (in characters) of the Remote field in a message is not large enough to contain the
remote data that is being downloaded into the field. Not all the remote data is downloaded
into the field. If necessary, you can edit the message to increase the size of the field. Use the
Enter Number of Characters screen (see ‘Add a Remote field to a message’ on page 108) to
increase the maximum number of characters that the remote device can download into the
selected field.
“3.69 Remote Field Not Found”
A Remote field exists in a message, but has been subsequently deleted from the list of fields
on the Remote Field List screen (see ‘Create a Remote field’ on page 104). The printer does
not recognize the deleted field and no remote data is downloaded into the field in the
message. If necessary, recreate the Remote field as described in ‘Create a Remote field’ on
page 104 and edit the message to add that field to it.
To Next Page
Loading...