Page 135 of 182 TP1A002–1 English
Aug 2015
Linx 8900 Operating Manual —
Printer communications
Linx 8900
7.2.3 Copy line settings to USB
To copy line settings from the printer to a memory device:
1 On the Home screen, touch the Menu button to display the Main Menu screen, and
then touch the Backup & Restore button. The Backup & Restore screen is
displayed (see Figure 139 on page 132).
2 Touch the Copy Line Settings to USB button to display the Copy Line Settings to
USB screen.
Figure 143. Copy Line Settings to USB screen
The four available lines on the printer are displayed. You use the same method to
select line settings to copy as you do for messages (see page 133 for more
information).
3 Touch the Copy button to copy the selected line settings to the memory device. If
the memory device contains a file that has the same name, see page 133 for the
available options.
If a copy operation fails for any other reason (for example, if the operation is
cancelled by the operator or if the memory device becomes full), the printer
displays an information message. Touch the Exit button to return to the Copy Line
Settings to USB screen.
When the copy operation is complete, the printer displays a confirmation screen.
4 Touch the Exit button to return to the Copy Line Settings to USB screen.
7.2.4 Copy line settings from USB
To copy line settings from a memory device to the printer:
1 On the Home screen, touch the Menu button to display the Main Menu screen, and
then touch the Backup & Restore button. The Backup & Restore screen is
displayed (see Figure 139 on page 132).
To Next Page
Loading...