(i) TP1A002–1 English
Aug 2015
Linx 8900 Operating Manual —
Copyright
Linx 8900
Copyright
No part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any human or computer language by any means or in
any form, without the express prior written permission of Linx Printing Technologies Ltd.
Neither whole nor part of the product described in this guide may be adapted or
reproduced in any material form without the express prior written permission of Linx
Printing Technologies Ltd.
Contravention of copyright may also reduce the ability of Linx Printing Technologies Ltd to
provide effective support for its equipment.
This First edition published 2015
© Linx Printing Technologies Ltd 2015
LINX and Easi-Change are registered trademarks of Linx Printing Technologies Ltd.
Manual content
The content of this manual is provided for information only. Nothing in the content of this
manual represents, or should be construed as, any contractual or other commitment on the
part of Linx Printing Technologies Ltd.
Linx products are subject to continual development and improvement, and updates to the
content of this manual will be made accordingly in subsequent editions.
Linx reserves the right to make changes without notice to both this publication and to the
products described herein.
All possible care has been taken in the preparation of this manual, and information of a
technical nature and particulars of the product and its use are given by Linx in good faith.
However, Linx makes no guarantees regarding the accuracy or completeness of this
publication.
Safety recommendation
Before attempting to use either the Linx 8900 or its accessories, you must read the
information contained in the Safety section of the Linx 8900 Quick Start Guide. It is essential
that you follow safe operating procedures at all times, and that the equipment is maintained
according to the directions contained herein and as recommended by Linx or its authorized
Distributors. It is strongly recommended that any maintenance tasks, other than those
described in this manual, are performed only by Linx maintenance technicians or
Linx-trained personnel.
To Next Page
Loading...
Need help?
General