Page 22 of 182 TP1A002–1 English
Aug 2015
Linx 8900 Operating Manual —
Printer user interface
Linx 8900
2.4.2 Output status option button
The background colour of the option button on the carousel area indicates the current
output status of the printer, as shown in the table below.
Table 2-5. Output status: option button background
2.4.3 Output rate logging
The printer saves a log of output information in Comma Separated Variable (.csv) format,
which you can export to a USB memory device (see ‘Export Log’ on page 145). The log entry
contains the following information:
• Log type (see ‘Export Log’ on page 145 for more information about log types)
• Date and time
• Message name
• Print count
• Target rate
• Actual rate
The log entry is in the format ‘Log Type, Date-Time, Message Name, Print Count, Target
Rate, Actual Rate’.
For example:
‘PL, 12-07-2015T09:00:00, BEST BEFORE, 10, 30, 35’
That is, a periodic log entry, recorded at 9 a.m. on the 12th of July 2015 for the message “Best
Before”, where the print count is 10, and the target and actual print rates are 30 and 35,
respectively.
A new log entry is produced whenever the following conditions are met:
• Every 15 minutes (that is, at 00, 15, 30, and 45 minutes past the hour).
• When the current message is changed.
• When printing starts.
• When printing stops.
• When the target rate changes.
• When the printer date or time changes.
Current Target Method Current output status Background colour
End Time or Output Rate On target White
End Time or Output Rate Ahead of target Green
End Time or Output Rate Behind target Red
None On target/Ahead of target/Behind target White
To Next Page
Loading...