Linx 8900 - Page 28

Page 21 of 182 TP1A002–1 English
Aug 2015
Linx 8900 Operating Manual —
Printer user interface
Linx 8900
Table 2-4. Screensaver appearance
When the printer is not in the ‘Printing’ state, the output rate is always shown as ‘0’
When the printer is not in the ‘Printing’ state, the estimated end time is shown as ‘--’ if
no prints have been made since printer powerup. If prints have been made, the
estimated end time is displayed, calculated from the items that remain to be coded and
the last recorded print rate.
• Screen Saver Timeout—this option is enabled if the Screen Saver option is set to
Enabled. Enter a timeout period of between 10 seconds and 180 seconds. After this
timeout period, the screensaver is displayed. The default timeout period is 120 seconds.
Current Target
Method
Current output status Print state Output status appearance
None N/A N/A Black text on white
background
End Time End time = Estimated end time N/A Black text on white
background
End Time End time > Estimated end time Printing White text on red
background
End Time End time > Estimated end time Not printing Black text on white
background
End Time End time < Estimated end time Printing White text on green
background
End Time End time < Estimated end time Not printing Black text on white
background
Output Rate Output rate = Current rate N/A Black text on white
background
Output Rate Output rate > Current rate Printing White text on red
background
Output Rate Output rate > Current rate Not printing Black text on white
background
Output Rate Output rate < Current rate Printing White text on green
background
Output Rate Output rate < Current rate Not printing Black text on white
background