Page 172 of 182 TP1A002–1 English
Aug 2015
Linx 8900 Operating Manual —
Look after your printer
Linx 8900
NOTE: You cannot reset this value at Supervisor level. Please contact your local Linx
Distributor for more information.
9.14.7 Recent Solvent Cartridges
This item shows the volume of solvent (in the number of 1000 ml cartridges that were used
per 28-day period) used since the consumables history statistics were last reset. This allows
you to track usage over a set period of time. To allow an accurate calculation of usage, the
value is not displayed during the first seven days (a hyphen is displayed instead). This
value provides an indication of fluid costs, printer usage, and efficiency.
NOTE: You cannot reset this value at Supervisor level. Please contact your local Linx
Distributor for more information.
9.14.8 Current Ink Usage
This item shows the calculated ink usage in ml per hour. The usage is measured when a
message is being printed. A value is only displayed when ink consumption is stable and an
accurate calculation is possible. Until then, a hyphen is displayed. This value provides an
indication of the printer efficiency in the current application.
NOTE: The ink usage varies according to the ambient temperature, the solvent type, and
the period of time that the printer is in the ‘Jet Running’ or ‘Printing’ state. The
value displayed is based on average usage during the previous 28 days. If the
printer was commissioned, or if the consumables history was reset within the last
28 days, the current usage is based on the time since those events.
9.14.9 Current Solvent Usage
This item shows the calculated solvent usage in ml per hour. The usage is measured when a
message is being printed. A value is only displayed when solvent consumption is stable and
an accurate calculation is possible. Until then, a hyphen is displayed. This value provides an
indication of the printer efficiency in the current application.
NOTE: The solvent usage varies according to the ambient temperature, the solvent type,
and the period of time that the printer is in the ‘Jet Running’ or ‘Printing’ state. The
value displayed is based on average usage during the previous 28 days. If the
printer was commissioned, or if the consumables history was reset within the last
28 days, the current usage is based on the time since those events.
To Next Page
Loading...