Page 27 of 182 TP1A002–1 English
Aug 2015
Linx 8900 Operating Manual —
Printer user interface
Linx 8900
• Timeout—if the Automatic Log Timeout option is set to Yes, this option allows you to
specify a timeout period of 1 to 30 seconds, after which automatic logging starts. When
this period expires, a log entry is added with the text “Timeout exceeded - Not
Printing” and a timestamp that shows when the entry was added.
• Automatic Log Faults—if this option is set to Yes, automatic logging of printer faults is
enabled. The fault text (for example, “2.12 Viscosity Out of Range”) is logged with a
timestamp that shows when the fault occurred.
NOTE: You can delete, but not edit, automatic log entries on the Edit Log Entry screen.
To Next Page
Loading...