LMI Technologies Master 800 User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 365
Element Type Description
1 – Disk
2 – Bar
3 – Plate
StationaryTarget.options 32s (CSV) List of available stationary alignment targets.
MovingTarget 32s
Moving alignment target:
1 – Disk
2 – Bar
MovingTarget.options 32s (CSV) List of available moving alignment targets.
EncoderCalibrateEnabled Bool Enables encoder resolution calibration.
Disk Section
See Disk below.
Bar Section
See Bar below.
Plate Section
See Plate on the next page.
Disk
Element Type Description
Diameter 64f Disk diameter (mm).
Height 64f Disk height (mm).
Disk Child Elements
Bar
Element Type Description
Width 64f Bar width (mm).
Height 64f Bar height (mm).
HoleCount 32u Number of holes.
HoleCount.value 32u
Actual number of holes expected by system.
HoleCount.used Bool
Whether the hole count with be used in the bar alignment proceudure.
HoleDistance 64f Distance between holes (mm).
HoleDistance.used Bool Whether the hole distance will be used in the bar alignment procedure.
HoleDiameter 64f Diameter of holes (mm).
HoleDiameter.used Bool Whether the hold diameter will be used in the bar alignment procedure.
DegreesOfFreedom 32s
Degrees of freedom (DOF) to align:
42 – 3 DOF: x, z, y angle
58 – 4 DOF: x, y, z, y angle
59 – 5 DOF: x, y, z, y angle, z angle
Bar Child Elements

LMI Technologies Master 800 Specifications

General

Brand	LMI Technologies
Model	Master 800
Category	Accessories
Language	English