LMI Technologies Master 800 User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 421
Element Type Description
Scale 64f Output scaling factor.
Offset 64f Output offset factor.
DecisionMin 64f Minimum decision threshold.
DecisionMax 64f Maximum decision threshold.
SurfaceOpening
A SurfaceOpening element defines settings for a surface opening tool and one or more of its
measurements.
Element Type Description
Name String Tool name.
Features
Collection Collection of geometric feature outputs available in the tool.
See SurfaceOpening above.
Source 32s Surface source.
Anchor\X String (CSV) The X measurements (IDs) used for anchoring.
Anchor\X.options String (CSV) The X measurements (IDs) available for anchoring.
Anchor\Y String (CSV) The Y measurements (IDs) used for anchoring.
Anchor\Y.options String (CSV) The Y measurements (IDs) available for anchoring.
Anchor\Z String (CSV) The Z measurements (IDs) used for anchoring.
Anchor\Z.options String (CSV) The Z measurements (IDs) available for anchoring.
Anchor\ZAngle String (CSV) The Z Angle measurements (IDs) used for anchoring.
Anchor\ZAngle.options String (CSV) The Z measurements (IDs) available for anchoring.
StreamOptions Collection
A collection of StreamOptions on page 382 elements.
Stream\Step
32s The stream source step. Possible values are:
1 – Video
2 – Range
3 – Surface
4 – Section
Stream\Id 32u The stream source ID.
Type 32s
Type of the opening:
0 – Rounded
1 – Slot
NominalWidth 64f Nominal width (mm).
NominalLength 64f Nominal length (mm).
NominalAngle 64f Nominal angle (degrees).
NominalRadius 64f Nominal radius (mm).
WidthTolerance 64f Radius tolerance (mm).
SurfaceOpening Child Elements

LMI Technologies Master 800 Specifications

General

Brand	LMI Technologies
Model	Master 800
Category	Accessories
Language	English