Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 80
To switch between types of frame information:
l Click the frame information area to switch to the next available type of information.
Interface Language
The language button on the right side of the status bar lets you change the language of the Gocator
interface.
To use the log:
1. Click the language button at the bottom of the web interface.
2. Choose a language from the list.
The Gocator interface reloads on the page you were working in, displaying the page using the language you
chose. The sensor state is preserved.
Quick Edit Mode
When working with a very large number of measurement tools (for example, a few dozen) or a very
complex user-created GDK tool, you can switch to a "Quick Edit"mode to make configuration faster.
When this mode is enabled, the data viewer and measurement results are not refreshed after each
setting change. Also, when Quick Edit is enabled, in Replay mode, stepping through frames or playing
back scan data does not change the displayed frame.
When a sensor is running, Quick Edit mode is ignored:all changes to settings are reflected
immediately in the data viewer.
To Next Page
Loading...
Need help?
General
