Gocator Line Profile Sensors: User Manual
Gocator Device Files • 440
Element Type Description
Measurements 32u (CSV) Selected measurement sources.
Measurements.options 32u (CSV) List of available measurement sources.
Selcom
Element Type Description
Rate 32u Output bit rate.
Rate.options 32u (CSV) List of available rates.
Format 32s
Output format:
0 – 12-bit
1 – 12-bit with search
2 – 14-bit
3 – 14-bit with search
Format.options 32s (CSV) List of available formats.
DataScaleMin 64f Measurement value corresponding to minimum word value.
DataScaleMax 64f Measurement value corresponding to maximum word value.
Delay 64u Output delay in µs.
Selcom Child Elements
Ascii
Element Type Description
Delimiter String Field delimiter.
Terminator String Line terminator.
InvalidValue String String for invalid output.
CustomDataFormat String Custom data format.
CustomFormatEnabled Bool Enables custom data format.
StandardFormatMode 32u
The formatting mode used if not a custom format:
0 – Standard
1 – Standard with Stamp
Ascii Child Elements
Transform
The transformation component contains information about the physical system setup that is used to:
l Transform data from sensor coordinate system to another coordinate system (e.g., world)
l Define encoder resolution for encoder-based triggering
l Define the travel offset (Y offset) between sensors for staggered operation
You can access the Transform component of the active job as an XMLfile, either using path notation, via
"_live.job/transform.xml", or directly via "_live.tfm".
To Next Page
Loading...
Need help?
General
