Gocator Line Profile Sensors: User Manual
Gocator Device Files • 371
Element Type Description
GammaType 32s Gamma type.
GammaType used Bool Determines if the setting’s value is currently used.
GammaType value 32s Value in use by the sensor. Useful for determining value when
used is false.
SpotContinuitySorting Section
See SpotContinuitySorting Child Elements below.
SurfaceEncoding 32s Surface encoding type:
0 – Standard
1 – Interreflection (advanced users only)
SurfaceEncoding.used Bool Determines if the setting’s value is currently used.
SurfaceEncoding.value Bool Value in use by the sensor, useful for determining value when
used is false.
SurfacePhaseFilter 32s
Surface phase filter (correction type)
0 – None
1 – Reflective
2 - Translucent
SurfacePhaseFilter.used Bool Determines if the setting’s value is currently used.
SurfacePhaseFilter.value Bool Value in use by the sensor, useful for determining value when
used is false.
Element Type Description
MinimumSegmentSize 32u Smallest continuous segment considered in continuity sorting.
SearchWindow/X 32u X component of continuity sorting search window size.
SearchWindow/Y 32u Y component of continuity sorting search window size.
SpotContinuitySorting Child Elements
IndependentExposures
Element Type Description
@used Bool Whether this field is used
Enabled Bool Whether to allow using separate exposure values for each
camera
FrontCameraExposure 64f The exposure value to use for the front camera
FrontCameraExposure.min 64f The minimum exposure value possible for front camera
FrontCameraExposure.max 64f The maximum exposure value possible for back camera
BackCameraExposure 64f The exposure value to use for the front camera
BackCameraExposure.min 64f The minimum exposure value possible for front camera
BackCameraExposure.max 64f The maximum exposure value possible for back camera
IndependentExposures Child Elements
SurfaceGeneration
The SurfaceGeneration element contains settings related to surface generation.
To Next Page
Loading...
Need help?
General
