Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 95
Travel speed can also be set automatically by performing an alignment with Type set to Moving (see
Aligning Sensors on page 126).
Jobs
The Jobs category on the Manage page lets you manage the jobs stored on a sensor.
Element Description
Namefield Used to provide a job name when saving files.
Jobs list Displays the jobs that are currently saved in the sensor's flash storage.
Save button
Saves current settings to the job using the name in the Name field.
Load button Loads the job that is selected in the job list. Reloading the current job discards any unsaved changes.
Delete button Deletes the job that is selected in the job list.
Set as Default
button
Sets the selected job as the default to be loaded when the sensor starts. When the default job is
selected, this button is used to clear the default.
Download...
button
Downloads the selected job to the client computer.
Upload...
button
Uploads a job from the client computer.
Jobs can be loaded (currently activated in sensor memory) and set as default independently. For
example, Job1 could be loaded, while Job2 is set as the default. Default jobs load automatically when a
sensor is power cycled or reset.
To Next Page
Loading...
Need help?
General
