2-44
Issue 9 October 1998
363-206-204
Equipment and Rear Access Cable Installation
Notes
:
1. Inputs to the minor alarm and power minor alarm connections are normally derived from
the -48 volt alarm outputs of a
SLC®
Series 5 Carrier System power shelf. An external
ground must be connected to output-common to access the alarm. Refer to Figure 2-15
(Releases 6 and 7) or Figure 2-17 (Releases 8, 9, 11 and 13).
2. The external inputs to the miscellaneous (environmental) discretes is a contact closure
and is connected to the DDM-2000 by two leads (wires). For each of the miscellaneous
(environmental) inputs that are being used, connect one lead to input-common (TLMI-C)
and the other lead to the appropriate alarm designation (TLMI-#).. Refer to Figure 2-15
(Releases 6 and 7) or Figure 2-17 (Releases 8, 9, 11 and 13).
Table 2-12. Miscellaneous (Environmental) Discrete Telemetry Connections (RT)
Remote Terminal (All Releases)
Remote Terminal Additional
Environ-mental Inputs (Releases
8, 9, 11 and 13)
ED8C704-20
Cable
(J61)
ED8C724-22
Cable
(J62)
Name Design. Conn. Name Design. Conn. Term Color Color
Minor Alarm
Power Minor Alarm
Fan Control
Input-Common
MN
PMNT-IN
FAN-CTL
TLMI-C
J62 Env. Input - #20
Input-Common
TLMI-20
TLMI-C
J61 4
18
23
9
W-O
R-BR
O-BK
S-W
W-BL
BR-W
Env. Input - #1
Env. Input - #2
Env. Input - #3
Env. Input - #4
TLMI-1
TLMI-2
TLMI-3
TLMI-4
17
15
13
11
BR-R
G-R
O-R
BL-R
Env. Input - #5
Env. Input - #6
Env. Input - #7
Env. Input - #8
TLMI-5
TLMI-6
TLMI-7
TLMI-8
7
5
3
1
BR-W
G-W
O-W
BL-W
Env. Input - #9
Env. Input - #10
Env. Input - #11
Env. Input - #12
TLMI-9
TLMI-10
TLMI-11
TLMI-12
Env. Input - #16
Env. Input - #17
TLMI-16
TLMI-17
16
14
12
10
R-G
R-O
R-BL
W-S
W-G
G-W
Env. Input - #13
Env. Input - #14
Output - Common
Env. Output - #1
TLMI-13
TLMI-14
TLMO-C
TLMO-1
Env. Input - #18
Env. Input - #19
TLMI-18
TLMI-19
8
6
21
19
W-BR
W-G
BL-BK
S-R
W-O
O-W
Env. Output - #2
Env. Output - #3
Env. Output - #4
No Connection
TLMO-2
TLMO-3
TLMO-4
NC Env. Input - #21 TLMI-21
24
22
20
2
BK-O
BK-BL
R-S
W-BL BL-W