Lucent Technologies DDM-2000 OC-3 Installation Manual

363-206-204
Powering, Verification, and Circuit Pack Installation
Issue 9 October 1998
4-31
BBG5 (SYSCTL) Option Notes
:
1. The SYSCTL has four option switches which must be properly set. Refer to the
option switch settings of Figure 4-5 on the following pages.
2. All switches should be set per the customer’s engineering records. In the
absence of engineering records, refer to Table 4-2
Figure 4-7. BBG5 (SYSCTL) Option Switches (Sheet 1 of 5)
Component Side
Connector
Edge
OFF
21
S4
S3
S2
S1
Latch
ON
S1, S2 or S3
876543
S4
OFF
ON
21

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English