Lucent Technologies DDM-2000 OC-3 - DDM-2000 OC-3 Releases

1-2
Issue 9 October 1998
363-206-204
Introduction
number of Lucent Technologies practices which are referenced in 363-205-000,
SLC® Series 5 Carrier System Ordering Guide.
It is strongly recommended that, if any multi-vendor operation is anticipated, or if
there is interface with an IAO LAN, a copy of
Lucent Technologies 2000 Product
Family Multi-Vendor Operations Interworking Guide
, 824-102-144, be immediately
available.
DDM-2000 OC-3 Releases
The DDM-2000 OC-3 features are released in distinct phases.
■
Release 2 supports optical point-to-point, hubbing and linear drop applica-
tions. (New installations not available.)
■
Release 3 supports, in addition to Release 2 features, VT add/drop applica-
tions. (New installations not available.)
■
Release 5 supports VT and STS-1 path switched rings applications, with
DS1, DS3 and EC-1 interfaces in addition to Release 3 features. (New
installations not available.)
■
Release 6 supports, in addition, EC-1 High and low speed interfaces.
■
Release 7 supports, in addition to Release 5 features, EC-1 Dual Ring
Interworking with VT/STS-1 drop and continue, and OC-3 ring with OC-3
optical extensions.
■
Release 7.2 supports, in addition to Release 7 features, OC-3 Operations
Interworking with FT-2000 with DCC conductivity, and Interworking
between BBG5/BBG7 and BBG8/BBG9 controller platforms.
■
Release 8 supports, in addition to Release 6 features, OC-3 Operations
Interworking with FT-2000 with DCC conductivity, and linear OC-3/IS-3
extension from an OC-12 ring.
■
Release 9 supports, in addition to Release 7.2 features, DDM-2000 Fiber-
Reach host, and VT Hairpin topology.
■
Release 11 supports, in addition to Release 9 features, operation of an
OC-12 ring through the OC-3 shelf and front panel separate access to each
of the DS3 circuit packs.
■
Release 13 supports, in addition to all Release 11 transmission features,
enhanced FiberReach topologies, transmultiplexer DS3 path termination,
High data rate Digital Subscriber Line (HDSL)*, and interworking with Tel-
labs
TITAN
†
5500/S Release 5.0 Digital Cross-Connect System.
†
TITAN
is a trademark of Tellabs, Inc.