Manitowoc Published 09-09-16, Control # 229-09 3-29
MLC650 SERVICE/MAINTENANCE MANUAL ELECTRICAL SYSTEM
PD-26 No Connection
PD-27 KL15 Control Module Ignition Power (from relay K5)
0V
DC
Open, 24 V
DC
Closed
PD-28 ID9 Upper Boom Point Confirm
0V
DC
Not Installed, 24 V
DC
Installed
PD-29 GND Ground (from load center)
0V
DC
PD-30 CAN1_L CAN Bus D—Low Not Applicable
PD-31 CAN1_H CAN Bus D—High Not Applicable
PD-32 No Connection
PD-33 No Connection
PD-34 No Connection
PD-35 No Connection
PD-36 No Connection
PD-37 IACV14 Wind Speed Sensor
0 to 20 mA
PD-38 IACV15 Upper Boom Point Load Pin
0V
DC
Open, 24 V
DC
Closed
PD-39 IACV16 Not Used—For Possible Future Expansion
0V
DC
PD-40 No Connection
PD-41 No Connection
PD-42 No Connection
Pin I/O Network Function Voltages
To Next Page
Loading...
Need help?
General
