Matrix 0850 - Load an Existing Workpiece; Unload the Workpiece

0850/0850-T1 User Manual
Matrix Machine Tool (Coventry) Limited 106 / 231
Edition: 08/2013
19.2.2 Load an existing workpiece
1. Insert the ORANGE Siemens Key in position 3.
2. Select Select [Workpiece Manager] softkey from the main menu.
3. Enter a name (max 8 of characters) of an existing workpiece name that you want to use
followed by pressing the yellow [INPUT] key.
4. Select the [Load HD >NC] softkey to transfer the stored workpiece data into the NC memory
and make this the active workpiece. This action will restored part data and cycle data
information for the workpiece.
5. Select the [Return] softkey to return to the main menu screen.
19.2.3 Unload the workpiece
1. Insert the ORANGE Siemens Key in position 3.
2. Select Select [Workpiece Manager] softkey from the main menu.
3. To unload the active workpiece enter the name of the active workpiece in the input field and
then select the [Unload NC > HD] softkey.
4. Select the [Return] softkey to return to the main menu screen.