0850/0850-T1 User Manual
Matrix Machine Tool (Coventry) Limited 16 / 231
1.10 Machine User
Only properly trained and authorised personnel must be allowed to operate and maintain this
equipment. All areas of responsibility for the operation, setting-up and maintenance of this
equipment must be clearly specified and complied with.
CAUTION - RISK OF DANGER!
The relevant section of the user manual must be consulted where this symbol is
marked on the machine.
CAUTION - RISK OF ELECTRIC SHOCK!
The relevant section of the user manual must be consulted where this symbol is
marked on the machine.
Make yourself familiar with the Protection of Eyes Regulations, the Abrasive Wheel Regulation and
the duty of all employees under the Health and Safety at Work Act.
Section 7 states; it shall be the duty of every employee while at work to take reasonable care of the
Health and Safety of himself and other persons who may be affected by acts or omissions at work.
1.11 Service and Maintenance
Repairs to the equipment must only be carried out by trained and qualified personnel in accordance
with the servicing and maintenance guidelines. Machine warranty will become void if any repairs or
modifications are made without the express permission of Matrix.
To Next Page
Loading...
