0850/0850-T1 User Manual
Matrix Machine Tool (Coventry) Limited 15 / 231
DO
Be certain that the component is mounted securely.
Stop coolant flow before stopping wheel.
Accept machine limits for wheel speed.
Switch the main electrical cabinet isolator OFF or press the machine Emergency Stop push
button to remove power before changing the wheel.
Inspect a new grinding wheel before mounting it on the machine. Look for cracks, nicks or
signs of damage. If you see these or have doubt about the soundness of the wheel, do not use
it.
Inspect wheel adaptor flange before mounting a wheel.
Use light pressure when mounting a wheel.
Check that you have the right wheel and that the machine spindle speed is correct for the
wheel and the quill.
Store wheels in a box and handle carefully.
DO NOT
try to stop a coasting grinding wheel with your hand or hand held object
run coolant on a stationary wheel
modify the drive to get higher wheel speeds
use special pulleys, high speed motors or speed control devices which have been altered or
made inactive
force a wheel on to a wheel adaptor
To Next Page
Loading...
