Matrix 0850 - Command Functions

0850/0850-T1 User Manual
Matrix Machine Tool (Coventry) Limited 95 / 231
Edition: 08/2013
17.8 Command functions
A selection of command functions have been provided for your convenience.
YES
FIN
WARM
UP
Function keys [YES], [FIN] and [SETUP] are generally applicable when the grinding or setting cycles are
executed.
COOLANT ON/OFF
Coolant supply ON/OFF toggle.
The indicator above the key is illuminated then coolant supply to the machine is
disabled i.e No basewash, grinding or dressing coolant permitted.
UNLOCK DOOR
Guard door unlock request.
Press this key to unlock the guard door when there is no active cycle running.
The indicator above the key flashes to inform you when the door is unlocked.
HAND UNIT ENABLE/DISABLE
Hand held unit ON/OFF toggle.
Press this key if you want to use the hand held unit functions.
The indicator above the key is illuminated when the handheld unit function is
enabled.