0850/0850-T1 User Manual
Matrix Machine Tool (Coventry) Limited 17 / 231
2 Liability Exclusions
Matrix Machine Tool (Coventry) Limited are excluded from all liability where the equipment supplied
has been used in a manner other than intended OR has been modified without the express written
permission of Matrix Machine Tool (Coventry) Limited which has subsequently resulted in the
machine to malfunction, become damaged or caused injury to the user.
Summary of exclusions (but not limited to):
1. Any usage or application beyond the specified scope of the supplied equipment.
2. Any usage or operation of the equipment in a technically imperfect condition.
3. Any usage or operation of the equipment without due provision for safety considerations or
hazards.
4. Any usage or operation of the equipment in contravention of the instructions set out in this
user manual.
5. Any usage or operation of the equipment in contravention of information in any third-party
literature provided with the equipment.
6. Any usage or operation where faults that could affect safety are not remedied before start-
up.
7. Any modification, bypassing or de-commissioning of equipment whose intended purpose is to
ensure proper functioning or safety.
8. Unrestricted usage or operation of the equipment and/or active and passive safety.
The end user is responsible for providing a suitable padlock to secure mains isolator switch in the OFF
position when the machine is not being used for prolonged periods.
To Next Page
Loading...
