Matrix 0850 - Explanation of the Input Parameters

0850/0850-T1 User Manual
Matrix Machine Tool (Coventry) Limited 147 / 231
Edition: 08/2013
19.11.1 Explanation of the Input Parameters
Num Correction Lengths
Input Range: 0 – 8
With parameter you can define how many correction points are required.
Default value is 0 i.e no correction points are applied.
Sum of Correction Lengths
Input Range: 0 – 380 mm
Total length over which the length correction will be applied during workpiece grinding.
Z Length
Input Range: 0 – 380 mm
Length between adjacent correction points.