Matrix 0850 - Switching on the Coolant System

0850/0850-T1 User Manual
Matrix Machine Tool (Coventry) Limited 76 / 231
Edition: 08/2013
14.1 Switching on the coolant system
1. Turn the power isolator to the ON position
2. Release the Emergency Stop button
3. Press the Start button
1
Power isolator
4
Power on status indicator (white)
2
Emergency Stop button
5
Coolant panel fault indicator (red)
3
Coolant system start button
(green)
When the coolant system has been started the magnetic separator, centrifuge lift pump and
centrifuge units will run.
The main coolant delivery pump will only begin to operate after the machine has been started at the
control station [MASTER START] and provided that the [COOLANT OFF] button indicator is not
illuminated.
1
2
3
4
5