Matrix 0850 - Procedure for Starting an Automatic Cycle Using Two-Handed Start Buttons

0850/0850-T1 User Manual
Matrix Machine Tool (Coventry) Limited 73 / 231
Edition: 08/2013
12.1 Procedure for starting an automatic cycle using two-handed start buttons
1. Set Machine set in [AUTO] mode
2. Keyswitch set in position 0
3. Load the workpiece to be ground
4. Press in and hold together (within 0.5s) the LH and RH cycle start buttons until the door has
fully closed.
5. The automatic cycle will now begin to operate.