Matrix 0850 - Procedure to Edit Grind Cycle Variables

0850/0850-T1 User Manual
Matrix Machine Tool (Coventry) Limited 174 / 231
Edition: 08/2013
19.22.1 Procedure to edit Grind cycle variables
1. Select [AUTO] and [SETUP] mode
2. Select the Grind Data screen [Custom > Matrix > Main Menu > Cycle Data > Grind Data]
3. Enter data in each zone field as required.
4. Press the [UPDATE TABLE] vertical softkey and check the total stock to remove in each zone
(G1 to G5) you defined.
5. Finally, press the [SAVE DATA] vertical softkey to save the grinding cycle data to the
workpiece data file.