Press this key to execute the workpiece continuous rotate function.
The indicator above the key illuminates when the function is active.
Press this toggle key to open or close the steady rest arms.
The indicator above the key illuminates when the steady arms are clamped onto
the workpiece.
Press this key to execute the machine warm-up ASUP cycle.
Machine warm-up routine includes:
Grinding spindle running
Dressing spindle running
Exercising the configured machine axes
Coolant flow to machine area
Once initiated, the warm-up cycle will run for 60mins and then stop. However,
you can interrupt the cycle at any time be pressing the [RESET] key.
The indicator above the key illuminates whilst the warm-up cycle is running.
To Next Page
Loading...
