Mercury 40 FourStroke - Page 520

BIGFOOT GEAR HOUSING
Page 6B-54 90-857046R1 NOVEMBER 2001
3. Place water pump base lower seal on shorter shoulder side of Oil Seal Driver (91-13949)
with seal lip toward shoulder.
4. Apply Loctite 271 on O.D. of seal. Press seal into water pump base until tool bottoms.
5. Lubricate lip of each seal with 2-4-C Marine Lubricant with Teflon.
51553
c
91-13949
7
Loctite “271”
95
2-4-C with Teflon
7
95
a
b
e
d
a- Seal - Lip Faces DOWN (when water pump base is installed on gearcase)
b- Spring - Faces DOWN (when water pump base is installed on gearcase)
c- Oil Seal Driver (91-13949)
d- Longer Shoulder Side of Oil Seal Driver
e- Shorter Shoulder Side of Oil Seal Driver
6. Install gasket.
19218
a
a- Gasket