27 - 10
27.1 Direct Connection To CPU
27.1.6 Setting communication interface (Communication settings)
2 Communication detail settings
(1) Communication interface setting by Utility
The communication interface setting can be changed on the Utility's
"Communication setting" after downloading "Communication setting" of project
data.
For details on the Utility, refer to the following manual.
GT User's Manual
(2) Precedence in communication settings
When settings are made by GT Designer or the Utility, the latest setting is
effective.
Item Description Range
Transmission Speed
Set this item when change the transmission speed used for
communication with the connected equipment.
<Default: 115200bps>
When the setting exceeds the limit of the connected
equipment, communication is performed at the fastest
transmission speed supported by the connected equipment
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
To Next Page
Loading...
