Mitsubishi GOT1000 Series - Attaching Communication Unit and Connecting Cable

6 - 12
6.2 Preparatory Procedures for Monitoring
6.2.5 Attaching communication unit and connecting cable
6.2.5 Attaching communication unit and connecting cable
Cautions when attaching the communication unit and connecting the cable
Shut off all phases of the GOT power supply before attaching the communication
unit and connecting the cable.
1 Attaching the communication unit
CC-Link communication unit
For details of the CC-Link communication unit, refer to the following manual.
GT15 CC-Link communication unit User's Manual
1 Mount the interface converter unit to the extension
unit connector of the GOT.
2 Mount the CC-Link communication unit to the
interface converter unit.