Mitsubishi GOT1000 Series - Connecting to A0 J2 HCPU

2 - 14
2.1 System Configuration
2.1.4 Connecting to A0J2HCPU
2.1.4 Connecting to A0J2HCPU
1 System configurations and connection conditions
*1 The number of connectable GOTs is restricted depending on the number of intelligent function modules mounted
to the A0J2HCPU.
Section 2.3 When connecting multiple GOTs
2 System equipment
(1) GOT
(2) PLC
(3) Cable
Connection conditions
System configuration
Number of
GOTs
*1
Distance from main
base unit to 1st GOT
11m or less
Image No. Name Model name
Bus connection unit
• For terminal GOT
GT15-75ABUSL, GT15-75ABUS2L, GT15-ABUS, GT15-ABUS2
Image No. Name Model name
Power supply module
• Module that supplies power
to A0J2HCPU
A0J2-PW
Image No. Name Model name
Connection cable
• Between A0J2HCPU and
Power supply module
A0J2C03(0.3m), A0J2C06(0.55m), A0J2C10(1m),
A0J2C20(2m)
Connection cable
• Between Power supply
module and GOT
GT15-J2C10B(1m)
Communication driver
Bus(A/QnA)
MAX1m
connection cable
4
connection
cable
3
Power supply module
2
MAX6.6m
1
Terminal