Mitsubishi GOT1000 Series - Connecting to the MELSERVO-J2 M Series

24 - 4
24.1 System Configuration
24.1.2 Connecting to the MELSERVO-J2M series
24.1.2 Connecting to the MELSERVO-J2M series
1 System configuration and connection conditions
*1 Connect the connector of servo amplifier to CN3.
*2 Installation of 20 to 31 interface unit or drive unit stations is available.
Connection conditions
System Configuration
Number of
GOTs
Distance
1
15m or less
30m or less
Communication driver
MELSERVO-J3, J2S/M
MAX15m
*1
RS-232 cable
3
1
MAX30m
*1
CH ARGE
MIT SUBISH I
RS-422 cable
4
*2*2*2
*1*1
2