27.2 MELSECNET/10 Connection (PLC To PLC Network)
27.2.11 Precautions
27 - 41
25
BAR CODE READER
CONNECTION
26
PRINTER CONNECTION
27
CNC CONNECTION
28
MULTI-CHANNEL
FUNCTION
29
FA TRANSPARENT
FUNCTION
30
MULTIPLE-GT11
CONNECTION FUNCTION
31
GATEWAY FUNCTION INDEX
27.2.11 Precautions
1 Network configuration
Use MELSECNET/10 (PLC to PLC network) to configure a network including the GOT.
The following networks including the GOT cannot be configured.
• MELSECNET/10 (Remote I/O network)
• MELSECNET/H (PLC to PLC network: MELSECNET/H Mode, MELSECNET/H Extended Mode)
• MELSECNET/H (Remote I/O network)
2 Monitoring range
Only CNC of the same networks No. can be monitored in GOT.
For details, refer to the following manual.
GT Designer2 Version Screen Design Manual
3 Version of CNC
For MELDAS C6/C64, use NC system software version E0 or later.
To Next Page
Loading...
