20 - 1
20
17
CONNECTION TO
ALLEN-BRADLEY PLC
18
CONNECTION TO
SIEMENS PLC
19
MICROCOMPUTER
CONNECTION
20
CONNECTION TO OMRON
TEMPERATURE
CONTROLLER
21
CONNECTION TO
YAMATAKE TEMPERATURE
CONTROLLER
22
CONNECTION TO RKC
TEMPERATURE
CONTROLLER
23
CONNECTION TO
FREQROL SERIES
INVERTER
24
SERVO AMPLIFIER
CONNECTION
CONNECTION TO
OMRON
TEMPERATURE
CONTROLLER
20.1 System configuration . . . . . . . . . . . page 20-2
This section describes the equipment and cables needed
when connecting a GOT to a OMRON temperature controller.
Select a system suitable for your application.
20.2 Connection Cable. . . . . . . . . . . . . . page 20-8
This section describes the specifications of the cables needed
when connecting a GOT to a OMRON temperature controller.
Check the specifications of the connection cables.
20.3 Preparatory Procedures for Monitoring
. . . . . . . . . . . . . . . . . . . . . . . . . . . page 20-14
This section provides the procedures to be followed before
performing monitoring in connection to a OMRON temperature
controller. The procedures are written on the step-by-step
basis so that even a novice GOT user can follow them to start
communications.
20.4 Temperature Controller Side Setting
. . . . . . . . . . . . . . . . . . . . . . . . . . . page 20-28
The OMRON temperature controller side settings for GOT
connection are explained. When checking the PLC side
settings, refer to this section.
20.5 Precautions . . . . . . . . . . . . . . . . . page 20-32
This section describes the precautions about temperature
controller connection. Refer to this section without fail before
starting temperature controller connection.
20.6 List of Functions Added by Version Upgrade
. . . . . . . . . . . . . . . . . . . . . . . . . . page 20-33
This section describes the functions added by version
upgrade of GT Designer2 or OS.
To Next Page
Loading...
Need help?
General
