20 - 16
20.3 Preparatory Procedures for Monitoring
20.3.2 Checking OS installation on GOT
20.3.2 Checking OS installation on GOT
Check if the OS is properly installed or not on the Drive information tab of GT Designer2.
For the operation on the Drive information tab, refer to the following manual.
GT Designer2 Version Basic Operation/Data Transfer Manual
The OS has been installed successfully
on the GOT if the following can be confirmed:
1) Satndard monitor OS
2) Communication driver: OMRON
THERMAC/INPANEL NEO
To Next Page
Loading...
